Tanning bed lamps, as used in up-market tanning beds, are a big part of the mystery of that Hollywood suntan. You can have any depth of tan you desire with the wide variety of bulbs available on the market for tanning beds. There are deep-tanning lamps, bronzing bulbs, face lamps and plenty of others besides. These high-tech lamps utilize the latest technology to tan you comfortably and in safety.

Furthermore, there is a different bulb for every type of skin too. The sun bed industry produces different bulbs for dark to light skin colours. On top of that, you can have a soft tan, a golden tan, a bronze tan, or one the deepest of darkest tans you have ever seen. You can also change the type of lamp, as your tan progresses, so that you can achieve any combination of quite stunning results.

A tanning bulb is like having your own source of sunlight in a tube. In fact, it is even better, because you are in control of it! Modern tanning bed lamps are made to the strictest specifications and so are very safe. The tanning industry and the government have set strict rules to ensure your safety. So, if you carefully follow the instructions supplied with the lamps, you can feel confident that you will not be putting your health at stake in order to look like a Hollywood film star.

The UV rays that they produce are well below the proscribed safety limits to ensure you remain healthy and tanned. Furthermore, there are lots of choices open to you, ranging from UVB and UVA combinations to straight UVA. It is simply up to you. So, why not give the sun a helping hand?

Sun lamps are ultraviolet-emitting devices that serve as the primary element of the various kinds of tanning beds and booths on the market. Sun bed lamps have as their main purpose the enhancement of a cosmetic tan, although these bulbs also have a reputation for the successful treatment of eczema and psoriasis. The depth and type of tanning produced depends on the spectrum of light produced by the tanning lamps and the vast majority of them produce more ultraviolet light than the sun.

Nearly all tanning bulbs use a device called a ‘ballast’ to regulate their power consumption. The ballast stabilizes the flow of electrical current inside the lamp and is required to ensure that the bulbs use only the necessary amount of wattage that they require in order to work effectively.

There are different types of tanning lamps on the market including reflector sunbed lamps and high output bulbs. The majority of lamps fall into two main categories: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs have a lack of oxygen in its housing.

High pressure tanning bulbs vary in length from three to five inches and operate with 250 to 2,000 watt ballasts, 400 watt high pressure tanning bulbs are the most common. They are usually incorporated in the face tanning component of a sun bed. High pressure tanning bulbs are made of quartz glass and an additional specialized coating, which is necessary to filter out potentially deadly UVC ultraviolet rays.

HP tanning bulbs contain a small amount of mercury or argon and produce ultraviolet light in high amounts. The handling of high pressure tanning bulbs should be carried out with a great deal of care and never with naked hands, because even a tiny amount of oil from your hands will cause the bulb to fail prematurely or even break and the resultant spillage of mercury is potentially dangerous. High pressure tanning bulbs should be replaced after about 1,000 hours even though they will continue to produce light for up to 10,00 hours

Low pressure tanning lamps are much like fluorescent tubes, but the glass that makes up low pressure tanning bulbs automatically filters out UVC ultraviolet rays. Low pressure bulbs have a lifespan of six hundred to sixteen hundred hours of use.

Do you need to find out more about tanning bed bulbs? If so, please visit our website on tanning bed bulbs Grab a totally unique version of this article from the Uber Article Directory