In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ‘Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.

The home can use a range of new ideas to help with energy usage – including Solar Thermal and Solar Water Heating Collectors. Equally there is electricity that is generated through roof-installed panels. A further factor revolves around stoves and boilers – which are known as Biomass Energy. There is also the ground heat from the Sun – now known as Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Thermal Energy Systems: This technology is based around two core types of system. Firstly, there are elements that absorb energy from the sun and create hot water – known as Solar Water Heating Collectors. Added to this is the generation of electricity from solar radiation – known as Photovoltaism, or more commonly Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit – all the way up to 2-5k for a full professional fitting.

Biomass Energy: This term encompasses all forms of natural products – such as plant and animal material. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Perennial grasses also produce a high yield of dry matter. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Another biomass source is that of municipal waste – and this comes from recycled wood or food.

Systems Using Geo-Thermal Energy – Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greater return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.

Wind Energy Programs: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Finally, we have Hydropower; an area in which the UK does well within Europe. The ability to utilise energy from moving water, much like wind power, has been going on for thousands of years. It is this type of energy production that could meet 2 percent of all the UK’s demand.

Using a turbine, a Hydropower system can transform the energy of water into other forms. No water reservoirs are required – as the turbines either run through a water drop-off system or the natural power of the river. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. Having said that, this process could still generate 200mW of the National Capacity. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.

Copyright 2009 S. Edwards. Browse around CLICK HERE or Renewable Energy Certification.